Our product range includes several specifically designed devices which perform the function of collecting, switching and measuring for the various sensors manufactured by Pizzi Instruments. The boxes are available in resin as standard and can be provided in stainless steel or aluminium on request.
The junction and measurement boxes collect one or more instrument cables from one or more sensors and combine them into a single multi-core cable for transfer to remote locations. The boxes are provided with appropriate diameter cable glands, both for incoming signal cables, and multi-core exit cables.
If provided with appropriate terminal block with bushings, it is also possible to use a portable read out unit for local manual measurement.
The boxes accept instruments of all types: vibrating wire, analog, digital, resistance thermometers, crack meters, strain gauges, piezometers, coordinometers for pendulums etc.
The use of these boxes enables the rationalization of the system, thus allowing the immediate organization of provisional (and definitive) measurement points and the optimization of costs for the cables and the entire signal distribution system.
Our instruments can be used in all monitoring systems, both in protected environments and in harsh conditions, in simple or in structured systems, for structural, geotechnical and geological monitoring.
- Road and rail embankments
- Public and civil constructions
- Archaeological areas
- Ancient artifacts
- Different applications
Features and Benefits
Junction and measure panels are made by a box of adequate size, with IP56 protection as standard (higher protection degree on request), of type Gewiss or similar (optional: aluminum or steel). The panels equipped for measurement contain terminal blocks mounted on DIN bar for the connection of conductors and measuring bushings for connection to the contact pin of the portable units.
Junction and measure boxes are made of an appropriately sized waterproof enclosure with IP56 protection as standard (higher protection on request), Gewiss type or similar (aluminum/steel optional). The measurement boxes contain terminal blocks mounted on a DIN bar for the connection of conductors and measuring bushings for connection by PIN to the portable units. They are available in standard version for accepting 1-2-3-5-10-15-20 instruments connected with 2 or 3 wires cables. Other options on request. The entrance of the cables coming from the sensors or other boxes. Is realised by cable glands fixed to the side walls of the boxes themselves.
All boxes produced by us allow the gradual insertion of instruments during the installation phase. If necessary, they can be equipped with a bronze filter for compensating barometric pressure.
Simple and functional, they have an unscrewable cover (hinged cover on request) and contact measuring bushings.
Simply unscrew the cover and insert the terminals pis of the read out unit in the buscings of the instrument you want to measure.
|Protection Degree||IP 56|
|Protection against indirect contacts||Double Insulation|
|Installation temperature||Max +60°C; Min -25°C|
|Maximum voltage of use (Ue)||750V|
|Rated insulation voltage Ui:||750V|
|Material||GW PLAST 120, Halogen Free according to CEI EN 50267-2-2|
|Shock resistance||IK 08 according to EN 62262|
|Heat resistance||Thermo-pressure with ball 110°C|
|Resistance to abnormal heat and fire||Glow wire test 650°C|
If you have any requests or questions about our instruments or if you have special needs that require different solutions from the standard, please contact us. Our team will provide all the necessary information and will be very happy to work with you to study, develop and customize instruments and solutions suitable for your specific needs.
All information in our datasheet is subject to change without prior notice.
Please check the datasheet/details carefully and contact Pizzi Instruments for further information.